2-55
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear mls entry cef adjacency
clear mls entry cef adjacency
To clear CEF adjacency statistics, use the clear mls entry cef adjacency command.
clear mls entry cef adjacency
clear mls entry cef ip [[ip_addr/]mask_len] adjacency
clear mls entry cef ipx [[ipx_addr/]mask_len] adjacency
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is supported on Catalyst 6500 series switches configured with the Supervisor Engine 2
with Layer 3 Switching Engine II (PFC2).
To clear MLS entries on systems configured with the Supervisor Engine 1 with Layer 3
Switching Engine WS-F6K-PFC (Policy Feature Card), enter the clear mls entry command.
The ipx_addr value is entered as 32-bit hexadecimal digits.
Examples This example shows how to clear all adjacencies associated with CEF entries:
Console> (enable) clear mls cef entry adjacency
Adjacency statistics has been cleared.
Console> (enable)
Related Commands show mls entry cef
ip Specifies IP entries.
ipx Specifies IPX entries.
ip_addr (Optional) IP address of the entry.
mask_len (Optional) Mask length associated with the IP or IPX address of
the entry; valid values are from 0 to 32.
ipx_addr (Optional) IPX address of the entry.