2-886
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port inlinepower
show port inlinepower
To display the port power administration and operational status, use the show port inlinepower
command.
show port inlinepower [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines An inline power-capable device can still be detected even if the inline power mode is set to off.
The Operational (Oper) status field descriptions are as follows:
•on—Power is being supplied by the port.
•off—Power is not being supplied by the port.
•denied—The system does not have enough available power for the port; power is not being supplied
by the port.
•faulty—The port is unable to provide power to the connected device.
Examples This example shows how to display the inline power for multiple ports on a specific module:
Console> show port inlinepower 3/2-6
Default Inline Power allocation per port: 9.500 Watts (0.22 Amps @42V)
Total inline power drawn by module 3: 0 Watt
Port InlinePowered PowerAllocated
Admin Oper Detected mWatt mA @42V
----- ----- ------ -------- ----- --------
3/2 auto on yes 10.00 0.250
3/3 auto on yes 9.8 0.198
3/4 auto denied yes 0 0
3/5 off off no 0 0
3/6 off off yes 0 0
Console>
Related Commands set inlinepower defaultallocation
set port inlinepower
show environment
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.