2-413
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set port name
set port name
To configure a name for a port, use the set port name command.
set port name mod/port [port_name]
Syntax Description
Defaults The default is no port name is configured for any port.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is not supported by the NAM.
If you do not specify the name string, the port name is cleared.
Examples This example shows how to set port 1 on module 4 to Snowy:
Console> (enable) set port name 4/1 Snowy
Port 4/1 name set.
Console> (enable)
Related Commands show port
mod/port Number of the module and the port on the module.
port_name (Optional) Name of the module.