Cisco Systems 78-15328-01 set logging console

2-325
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set logging console
set logging console
To enable and disable the sending of system logging messages to the console, use the set logging console
command.
set logging console {enable | disable}
Syntax Description
Defaults The default is system message logging to the console is enabled.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to enable system message logging to the cons ol e:
Console> (enable) set logging console enable
System logging messages will be sent to the console.
Console> (enable)
This example shows how to disable system message logging to the console:
Console> (enable) set logging console disable
System logging messages will not be sent to the console.
Console> (enable)
Related Commands set logging level
set logging session
show logging
show logging buffer
enable Enables system message logging to the console.
disable Disables system message logging to the console.