2-280
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set igmp flooding
set igmp flooding
To activate or to prevent flooding of multicast traffic after the last host leaves a multicast group, enter
the set igmp flooding command.
set igmp flooding {enable | disable}
Syntax Description
Defaults IGMP flooding is enabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines For more information about IGMP flooding, refer to the “Understanding How IGMP Snooping Works”
section of the “Configuring Multicast Services” chapter of the Catalyst 6500 Series Switch Software
Configuration Guide.
Examples This example shows how to prevent the flooding of multicast tra ffic after the last host leaves a multicast
group:
Console> (enable) set igmp flooding disable
IGMP Flooding disabled
Console> (enable)
This example shows how to enable the flooding of multicast traffic after the last host leaves a multicast
group:
Console> (enable) set igmp flooding enable
IGMP Flooding enabled (default)
Console> (enable)
Related Commands show igmp flooding
enable Activates multicast flooding.
disable Prevents multicast flooding.