2-983
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show security acl resource-usage
show security acl resource-usage
To display VACL management information, use the show security acl resource-usage command.
show security acl resource-usage
Syntax Description This command has no keywords or arguments.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines The switch interface mapping table that associates an interface (for example, VLANs) into flows
programmed in TCAM.
Hardware resources are used to calculate Layer 4 port operation; for example, if you enter the permit
tcp any lt 20 host 1.2.3.4 gt 30 command, “lt 20” and “gt 30” are the Layer 4 port operation.
Examples This example shows how to display VACL management information:
Console> (enable) show security acl resource-usage
ACL resource usage:
ACL storage (mask/value) :(50%/19%)
ACL to switch interface mapping table :2%
ACL layer 4 port operators :0%
Console> (enable)
Table 2 -75 describes the possible fields in the show security acl resource-usage command output.
Related Commands clear security acl
commit
rollback
Table2-75 show security acl resource-usage Command Output Fields
Field Description
ACL storage (mask/value) Status of mask entry usage, where mask is the percentage of mask
entries used, and value is the percentage of value entries currently used.
ACL to switch interface
mapping table Percentage of ACL to switch interface mapping table usage.
ACL layer 4 port operators Percentage of ACL Layer 4 port op erat o rs.