Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear mls multicast statistics
2-57
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
22
To remove MLS multicast statistics maintained by the MSFC on the switch, us e the c lear mls multicast
statistics command.
clear mls multicast statistics [mod]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If you enter the clear mls multicast statistics command on a Catalyst6500 series switch without MLS,
this warning message is displayed:
MLS Multicast is not supported on feature card.
If you place the MFSC on a supervisor engine installed in sl ot 1, the MFSC is recognized as module 15.
If you install the supervisor engine in slot 2, the MFSC is recognized as module 16.
The mod option is not supported on switches configured with the Supervisor Engine 2 with Layer 3
Switching Engine II (PFC2).
Examples This example shows how to clear MLS statistics on a switch configured with the Supervisor Engine 1
with Layer 3 Switching Engine WS-F6K-PFC (Policy Feature Card):
Console> (enable) clear mls multicast statistics
All statistics for the MLS routers in include list are cleared.
Console> (enable)
This example shows how to clear MLS statistics on a switch configured with the Supervisor Engine 2
with Layer 3 Switching Engine II (PFC2):
Console> (enable) clear mls multicast statistics
All statistics cleared.
Console> (enable)
Related Commands show mls statistics
mod (Optional) Number of the MSFC; valid values are 15 and 16.