2-859
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show port capabilities
show port capabilities
To display the capabilities on the ports, use the show port capabilities command.
show port capabilities [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a mod value, the ports on all modules are shown.
If you do not specify a port value, all the ports on the module are shown.
Examples This example shows how to list the port capabilities on a specific module and port:
Console> show port capabilities 1/1
Model WS-X6K-SUP2-2GE
Port 1/1
Type Unknown GBIC
Speed 1000
Duplex full
Trunk encap type 802.1Q,ISL
Trunk mode on,off,desirable,auto,nonegotiate
Channel yes
Broadcast suppression percentage(0-100)
Flow control receive-(off,on,desired),send-(off,on,desired)
Security yes
Dot1x yes
Membership static,dynamic
Fast start yes
QOS scheduling rx-(1p1q4t),tx-(1p2q2t)
CoS rewrite yes
ToS rewrite DSCP
UDLD yes
Inline power no
AuxiliaryVlan no
SPAN source,destination
COPS port group 1/1-2
Link debounce timer yes
Console>
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.