2-872
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port cops
show port cops
To display COPS information on all or individual ports, use the show port cops command.
show port cops [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a mod value or a port value, information is shown for all ports on all modules.
For a few minutes after a switchover from the active to the standby supervisor engine, no te tha t if you
enter the show port cops command, the output may be incorrect. If this is the case, the following
warning displays:
COPS High Availability Switch Over in progress, hardware may be
programmed differently than as suggested by the output of these
commands.
Examples This example shows how to display COPS information for all ports:
Console> show port cops
Port Admin Roles Oper Roles
------ ------------------------------- -------------------------
1/1 backbone_port backbone_port
branch_office_port -
access_port -
1/2 - -
3/1 - -
3/2 backbone_port backbone_port
3/3 backbone_port backbone_port
3/4 access_port access_port
3/5 access_port branch_office_port
backbone_port -
branch_office_port -
net_port -
3/6 access_port access_port
3/7 - -
3/8 - -
Console>
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.