2-907
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show port status
show port status
To display port status information, use the show port status command.
show port status [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a mod value , the p orts on a ll modules ar e shown. If you do not specify a port value,
all the ports on the module are shown.
Examples This example shows how to display port status information for all ports:
Console> show port status
Port Name Status Vlan Duplex Speed Type
----- ------------------ ---------- ---------- ------ ------ ------------
1/1 connected 52 half 100 100BaseTX
1/2 notconnect half 100 100BaseTX
Console>
Table 2 -70 describes the fields in the show port status command output.
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.
Table2-70 show port status Command Output Fields
Field Description
Port Module and port number.
Name Name (if configured) of the port.
Status Status of the port (connected, notconnect, connecting, standby, faulty, inactive,
shutdown, disabled, or monitor).
Vlan VLANs to which the port belongs.
Duplex Duplex setting for the port (auto, full, half).
Speed Sp ee d setti ng f or the po rt ( aut o, 10, 1 00, 1000 ).
Type1
1. These fields will change according to the system configuration.
Port type (100BASE-TX).