2-751
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show interface
show interface
To display information on network interfaces, use the show interface command.
show interface
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to display sl0 and sc0:
Console> show interface
sl0: flags=51<UP,POINTOPOINT,RUNNING>
slip 0.0.0.0 dest 0.0.0.0
sc0: flags=63<UP,BROADCAST,RUNNING>
vlan 1 inet 172.20.52.19 netmask 255.255.255.224 broadcast 172.20.52.31
sc1: flags=63<UP,BROADCAST,RUNNING>
vlan 2 inet 0.0.0.0 netmask 255.0.0.0 broadcast 0.255.255.255
dhcp server: 174.44.67.201
Console>
Table 2 -33 describes the fields in the show interface command output.
Table2-33 show interface Command Output Fields
Field Description
sl0 Information on the SLIP interface.
flags Flags indicating the interface state (decoded in the subseq uent field).
<UP,POINTOPOINT,
RUNNING> Interface state (UP, DOWN, BROADCAST, LOOPBACK,
POINTOPOINT, or RUNNING).
slip IP address of the SLIP interface.