2-281
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set igmp leave-query-type
set igmp leave-query-type
To set the type of query to be sent when a port receives a leave message, use th e set igmp
leave-query-type command.
set igmp leave-query-type {mac-gen-query | general-query}
Syntax Description
Defaults By default, a MAC-based general query is sent when a port receives a leave message.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to send a MAC-based general query:
Console> (enable) set igmp leave-query-type mac-gen-query
Console> (enable)
This example shows how to send a general query:
Console> (enable) set igmp leave-query-type general-query
Console> (enable)
Related Commands show igmp leave-query-type
mac-gen-query Specifies a MAC-based general query.
general-query Specifies a general query.