2-819
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show mls verify
show mls verify
To display the Layer 3 error checking configuration, use the show mls verify command.
show mls verify
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to display the Layer 3 error checking configura tion:
Console> show mls verify
IP checksum verification disabled
IP minimum length verification enabled
IP inconsistant length verification disabled
IPX minimum length verification enabled
IPX inconsistant length verification disabled
Console>
Table 2 -48 describes the fields in the show mls verify command output.
Related Commands se t mls verify
Table2-48 show mls verify Command Output Fields
Field Description
IP checksum verification Status of whether IP checksum verification is enabled or disabled.
IP minimum length
verification Status of whether the verification of IP minimum packet length is
enabled or disabled.
IP inconsistent length
verification Status of whether the verification of IP length consistency is
enabled or disabled.
IPX minimum length
verification Status of whether the verification of IPX minimum packet length is
enabled or disabled.
IPX inconsistent length
verification Status of whether the verification of IPX length consistency is
enabled or disabled.