2-330
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set logging server
set logging server
To enable and disable system message logging to configured syslog servers and to add a syslog se rver
to the system logging server table, use the set logging server command.
set logging server {enable | disable}
set logging server ip_addr
set logging server facility severity
set logging server severity severity
set logging server facility
Syntax Description
Defaults The default is no syslog servers are configured to receive system messages.
enable Enables system message logging to configured syslog servers.
disable Disables system message logging to configured syslog servers.
ip_addr IP address of the syslog server to be added to the configurat ion.
facility Type of system messages to capture; server facility types are listed in
Table 2 -14.
severity Severity level; severity level definitions are listed in Table 2- 13.
severity
severity Sets the syslog maximum severity control globally for all message types;
severity level definitions are listed in Table 2-1 3.
Table2-14 Server Facility Types
Severity Level Description
local 0 Server facility local 0
local 1 Server facility local 1
local 2 Server facility local 2
local 3 Server facility local 3
local 4 Server facility local 4
local 5 Server facility local 5
local 6 Server facility local 6
local 7 Server facility local 7
syslog syslog facility