2-105
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear snmp targetaddr
clear snmp targetaddr
To clear the SNMP target address entry in the TargetAddressTable, use the clear snmp targetaddr
command.
clear snmp targetaddr [-hex] {addrname}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If you use special characters for the addrname value (nonprintable delimiters for this parameter), you
must use a hexadecimal keyword, which is one or two hexadecimal digits separated by a colon (:); for
example, 00:ab:34.
Examples This example shows how to clear an SNMP target address entry in the snmpTargetAddressTable:
Console> (enable) clear snmp targetaddr joe
Cleared SNMP targetaddr joe.
Console> (enable)
Related Commands se t snmp targetaddr
show snmp targetaddr
-hex (Optional) Displays the addrname value as a hexadecimal format.
addrname Name of the target agent; the maximum length is 32 bytes.