2-1032
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show spantree mistp-instance
show spantree mistp-instance
To display instance information, use the show spantree mistp-instance command.
show spantree mistp-instance [instance] [active]
show spantree mistp-instance mod/port
Syntax Description
Defaults The default instance is 1.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines This command is available in MISTP mode only.
If you specify the mod/port number only, the VLAN mapping information is not displayed.
Examples This example shows how to display information regarding active instances only:
Console> show spantree mistp-instance active
Instance 1
Spanning tree mode MISTP
Spanning tree type ieee
Spanning tree instance enabled
Designated Root 00-d0-00-4c-18-00
Designated Root Priority 32769 (root priority: 32768, sys ID ext: 1)
Designated Root Cost 0
Designated Root Port none
VLANs mapped: 1
Root Max Age 20 sec Hello Time 2 sec Forward Delay 15 sec
Bridge ID MAC ADDR 00-d0-00-4c-18-00
Bridge ID Priority 32769 (bridge priority: 32768, sys ID ext: 1)
VLANs mapped: 1
Bridge Max Age 20 sec Hello Time 2 sec Forward Delay 15 sec
Port Inst Port-State Cost Prio Portfast Channel_id
------------------------ ---- ------------- --------- ---- -------- ----------
2/3 1 forwarding 200000 32 disabled 0
2/12 1 forwarding 200000 32 disabled
Console>
instance (Optional) Instance number; valid values are from 1 to 16.
active (Optional) Displays only active ports.
mod/port Number of the module and the port on the mod ule.