2-792
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show mls cef summary
show mls cef summary
To display a summary of CEF table information, use the show mls cef summary command.
show mls cef summary
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines This command is supported on Catalyst 6500 series switches configured with the Supervisor Engine 2
with Layer 3 Switching Engine II (PFC2) only.
Examples This example shows how to display CEF information:
Console> show mls cef summary
Total L3 packets switched: 0
Total L3 octets switched: 0
Total route entries: 10
IP route entries: 9
IPX route entries: 1
IPM route entries: 0
IP load sharing entries: 0
IPX load sharing entries: 0
Forwarding entries: 1
Bridge entries: 6
Drop entries: 3
Console>
Table 2 -43 describes the possible fields in the show mls cef summary command output.
Table2-43 show mls cef summary Command Output Fields
Field Description
Total L3 pa cket s
forwarded Number of Layer 3 packets forwarded by the CEF engine.
Total L3 octets
forwarded Number of Layer 3 octets forwarded by the CEF engine.
Total route entries Number of route entri es.
IP route entries Number of IP route entries.