2-350
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set mls statistics protocol
set mls statistics protocol
To add protocols to the protocols statistics list, use the set mls statistics protocol command.
set mls statistics protocol protocol src_port
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If you enter any set mls comman ds on a Cataly st6500 series switch without MLS, this warning message
is displayed:
MLS not supported on feature card.
You can configure a maximum of 64 ports using the set mls statistics protocol command.
If you enter x for the source port, this specifies the Layer 4 port used by the X-windows application.
Examples This example shows how to set protocols for statistic collection:
Console> (enable) set mls statistics protocol 17 1934
Protocol 17 port 1934 is added to protocol statistics list.
Console> (enable)
Related Commands clear mls statistics entry
show mls statistics
protocol Name or number of the protocol; valid values are from 1 to 255, ip, ipinip,
icmp, igmp, tcp, and udp.
src_port Number or type of the source port; valid values are from 1 to 65535, dns, ftp,
smtp, telnet, x, and www.