2-640
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set traffic monitor
set traffic monitor
To configure the threshold at which a high-traffic log will be generated, use the set traffic monitor
command.
set traffic monitor threshold
Syntax Description
Defaults The threshold is set to 100 percent; no high-traffic log is created.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines I f backplan e traf f ic ex ceeds the th reshold co nf igured b y the set traffic monitor command, a h igh-tr af f ic
log is created. If the threshold is set to 100 percent, no high-traffic system warning is generated.
Examples This example shows how to set the high-traffic threshold to 80 percent:
Console> (enable) set traffic monitor 80
Traffic monitoring threshold set to 80%.
Console> (enable)
Related Commands show traffic
threshold 1 to 100 percent.