Cisco Systems 78-15328-01 set qos statistics export aggregate

2-484
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set qos statistics export aggregate
set qos statistics export aggregate
To enable or disable statistics data export on an aggregate policer, use the set qos statistics export
aggregate command.
set qos statistics export aggregate name {enable | disable}
Syntax Description
Defaults The default is disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines To export data, you need to enable statistics on the port. You also must globally enable statistics and data
export. (See the set qos statistics export command.)
This command is supported on systems configured with the Supervisor Engine 2 with Layer 3 Switching
Engine II (PFC2) only.
Examples This example shows how to enable statistics export:
Console> (enable) set qos statistics export aggregate ipagg_3 enable
Statistics data export enabled for aggregate policer ipagg_3.
Export destination: 172.20.15.1 (Stargate), port 9996
Console> (enable)
Related Commands set qos statistics export
show mac
show qos statistics export info
name (Optional) Name of the policer.
enable Enables statistics data export for the named aggregate policer.
disable Disables statistics data export for the named aggregate policer.