2-677
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show cam count
show cam count To display the number of CAM entries only, use the show cam count command.
show cam count {dynamic | static | permanent | system} [vlan]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a VLAN, all VLANs are displayed.
Examples This example shows how to display the number of dynamic CAM entries:
Console> (enable) show cam count dynamic
Total Matching CAM Entries = 6
Console> (enable)
Related Commands clear cam
set cam
dynamic Displays dynamic CAM entries.
static Displays static CAM entries.
permanent Displays permanent CAM entries.
system Displays system CAM entries.
vlan (Optional) Number of the VLAN; valid values are from 1 to 1005 and from
1025 to 4094.