2-356
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set module power
set module power
To turn the power on or off to a module, use the set module power command.
set module power up | down mod
Syntax Description
Defaults The default is power is on to a module.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The set module power up command allows you to check if adequate power is available in the sy stem to
turn the power on. If not enough power is available, the module status change s f rom p ower-down to
power-deny, and this message is displayed:
Module 4 could not be powered up due to insufficient power.
Examples This example shows how to power up module 4:
Console> (enable) set module power up 4
Module 4 powered up.
Console> (enable)
This example shows how to power down module 4:
Console> (enable) set module power down 4
Module 4 powered down.
Console> (enable)
Related Commands show environment
up Turns on the power to a module.
down Turns off the power to a module.
mod Number of the module.