2-395
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set port errdisable-timeout
set port errdisable-timeout
To prevent an errdisabled port from being enabled, use the set port errdisable-timeout command.
set port errdisable-timeout mod/port {enable | disable}
Syntax Description
Defaults By default, the errdisable timeout for each port is enabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines When the global timer times out, the port will be reenabled. Use the set port errdisable-timeout
command if you want the port to remain in the errdisabled state.
Examples This example shows how to preve nt port 3/3 from being enabled when it goes into errdisabled state:
Console> (enable) set port errdisable-timeout 3/3 disable
Successfully disabled errdisable-timeout for port 3/3.
Console> (enable)
Related Commands set errdisable-timeout
show errdisable-timeout
show port errdisable-timeout
mod/port Number of the module and the port on the mod ule.
enable Enables errdisable timeout.
disable Disables errdisable timeout.