2-508
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set security acl capture-ports
set security acl capture-ports
To set the ports (specified with the capture option in the set security acl ip, set security acl ipx, and
set security acl mac commands) to show traffic captured on these port s, u se t he set secur ity acl
capture-ports command.
set security acl capture-ports {mod/ports...}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines Configurations you make by entering this command are saved in NVRAM. This command does not
require that you enter the commit command.
The module and port specified in this command are added to the current ports configuration lis t.
This command works with Ethernet ports only; you cannot set ATM ports.
The ACL capture will not work unless the capture port is in the spanning tree forwarding state for the
VLAN.
Examples This example shows how to set a port to capture traffic:
Console> (enable) set security acl capture-ports 3/1
Successfully set 3/1 to capture ACL traffic.
Console> (enable)
This example shows how to set multiple ports to capture traffic:
Console> (enable) set security acl capture-ports 1/1-10
Successfully set the following ports to capture ACL traffic: 1/1-2.
Console> (enable)
Related Commands clear security acl capture-ports
show security acl capture-ports
mod/ports... Module and port number.