2-767
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show lacp-channel
Command Modes Normal.
Usage Guidelines If you do not specify the admin-key value, information about all LACP channels is displayed.
If you do not specify the channel_id value, information about all LACP channels is displayed.
For differences between PAgP and LACP, refer to the “Guidelines for Port Configuration” section of the
“Configuring EtherChannel” chapter of the Catalyst 6500 Series Switch Software Configuration Guide.
Examples This example shows how to display information about all LACP channels:
Console> show lacp-channel group
Admin Key Ports
----------- ------
69 4/1-2
70 4/5-6
143 2/1-2
151 4/3-4
152 4/7-8
Console>
This example shows how to display limited information about ports that are assigned to administrative
key 152:
Console> show lacp-channel group 152
Port Channel Admin Ch Partner Oper Partner
Mode Key id Sys ID Port
----- --------- ----- ---- --------------------------------- -------
4/7 active 152 770 8000,AC-12-24-56-78-90 4/3
4/8 active 152 770 8000,AC-12-24-56-78-90 4/4
Console>
This example shows how to display detailed information about ports that are assigned to administrative
key 152:
Console> show lacp-channel group 152 info
I = Isolated Port. C = Channeling Port. N = Not Connected.
H = Hot Stand-by Port. S = Suspended Port.
Port LACP Port Port Speed Duplex VLANs Trunk status Port STP Port PortSecurity/
Priority Status Cost Priority Dynamic Port
----- --------- ----- ----- ------ ------ ------------ ----- -------- ------------
4/7 130 C 1000 full 1-1005 not-trunking 4 32
4/8 131 C 1000 full 1-1005 not-trunking 4 32
Port Admin Channel if- Partner Oper Partner Partner Partner
Key id Index Sys ID Port Prior Port Oper Key
----- ----- ------- ----- ------------------------- ---------- -------- ----------
4/7 152 770 31 800,AC-12-24-56-78-90 248 4/3 15768
4/8 152 770 31 800,AC-12-24-56-78-90 249 4/4 15768
Console>