2-1097
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show vmps
show vmps
To display VMPS configuration information, use the show vmps command.
show vmps [noalias]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to display VMPS configuration information:
Console> show vmps
VMPS Server Status:
-------------------
Management Domain: (null)
State: disabled
Operational Status: inactive
TFTP Server: default
TFTP File: vmps-config-database.1
Fallback VLAN: (null)
Secure Mode: open
VMPS No Domain Req: allow
VMPS Client Status:
---------------------
VMPS VQP Version: 1
Reconfirm Interval: 60 min
Server Retry Count: 3
VMPS domain server:
No dynamic ports configured.
Console>
No dynamic ports configured.
Console>
Table 2 -99 describes the fields in the show vmps command output.
noalias (Optional) Forces the display to show IP addresses, not IP aliases.
Table2-99 show vmps Command Output Fields
Field Description
VMPS Server Status Status of VMPS server.
Management Domain Management domain supported by this server.