2-722
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show environment
This example shows how to display the inline power for all modules:
Console> show environment power
PS1 Capacity:919.38 Watts (21.89 Amps @42V)
PS2 Capacity:none
PS Configuration :PS1 and PS2 in Redundant Configuration.
Total Power Available:919.38 Watts (21.89 Amps @42V)
Total Power Available for Line Card Usage:885.78 Watts (21.09 Amps
@42V)
Total Power Drawn From the System:342.72 Watts ( 8.16 Amps @42V)
Remaining Power in the System:576.66 Watts (13.73 Amps @42V)
Configured Default Inline Power allocation per port:7.00 Watts (0.16
Amps @42V)
Slot power Requirement/Usage :
Slot Card Type PowerRequested PowerAllocated CardStatus
Watts A @42V Watts A @42V
---- ------------------- ------- ------ ------- ------ ----------
1 WS-X6K-S2U-MSFC2 145.32 3.46 145.32 3.46 ok
2 WS-X6148-GE-TX 151.20 3.60 151.20 3.60 ok
Slot Inline Power Requirement/Usage :
Slot CardType Total Allocated Max H/W Supported Max H/W Supported
To Module (Watts) Per Module (Watts) Per Port (Watts)
---- ------------------- ----------------- ------------------ --------------------
2 WS-X6148-GE-TX 12.6 400 15.400
Console>
This example shows how to display the inline power status for a specific module:
Console> show environment power 9
Module 9:
Default Inline Power allocation per port: 9.500 Watts (0.22 Amps @42V)
Total inline power drawn by module 9: 0 Watt
Slot power Requirement/Usage :
Slot Card Type PowerRequested PowerAllocated CardStatus
Watts A @42V Watts A @42V
---- ------------------- ------- ------ ------- ------ ----------
9 WS-X6348 123.06 2.93 123.06 2.93 ok
Default Inline Power allocation per port: 9.500 Watts (0.22 Amps @42V)
Port InlinePowered PowerAllocated
Admin Oper Detected mWatt mA @42V
----- ----- ------ -------- ----- --------
9/1 auto off no 0 0
9/2 auto off no 0 0
9/3 auto off no 0 0
9/4 auto off no 0 0
9/5 auto off no 0 0
.
.
.
Console>