2-363
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set ntp broadcastdelay
set ntp broadcastdelay
To configure a time-adjustment factor so the Catalyst6500 series switch can receive broadcast packets,
use the set ntp broadcastdelay command.
set ntp broadcastdelay microseconds
Syntax Description
Defaults The default is the NTP broadcast delay is set to 3000 milliseconds.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to set the NTP broadcast delay to 4000 milliseconds:
Console> (enable) set ntp broadcastdelay 4000
NTP broadcast delay set to 4000 microseconds.
Console> (enable)
Related Commands show ntp
microseconds Estimated round-trip time, in microseconds, for NTP broad ca sts;
valid values are from 1 to 999999.