2-324
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set logging buffer
set logging buffer
To limit the number of system logging messages buffered, use the set logging buffer command.
set logging buffer buffer_si ze
Syntax Description
Defaults The default value is 500.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to limit the syslog message buffer to 400 messages:
Console> (enable) set logging buffer 400
System logging buffer size set to <400>.
Console> (enable)
Related Commands clear logging buffer
set logging timestamp
show logging buffer
buffer_size Number of system logging messages to store in the buffer; valid
values are 1 to 500.