2-738
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show gvrp configuration
show gvrp configuration To display GVRP configuration information, including timer values, whether or not GVRP and dynamic
VLAN creation is enabled, and which ports are runnin g G VRP, use the show gvrp configuration
command.
show gvrp configuration
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If the port list exceeds the available line spaces, the list wraps to the next line.
If no ports are GVRP participants, the message output changes from:
GVRP Participants running on port_list
to:
GVRP Participants running on no ports.
Examples This example shows how to display GVRP configuration information:
Console> show gvrp configuration
Global GVRP Configuration:
GVRP Feature is currently enabled on the switch.
GVRP dynamic VLAN creation is enabled.
GVRP Timers(milliseconds)
Join = 200
Leave = 600
LeaveAll = 10000
Port based GVRP Configuration:
GVRP-Status Registration Applicant Port(s)
----------- ------------ --------- -------------------------------------------
Enabled. Normal Normal 2/1
Enabled. Normal Active 4/4
Enabled. Fixed Normal 4/9
Enabled. Fixed Active 4/11
Enabled. Forbidden Normal 4/10
Enabled. Forbidden Active 4/5
Disabled Normal Normal 2/2
4/12-24
5/1-8
Disabled Normal Active 4/1,4/8