2-709
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show counters
show counters
To display hardware counters for a port, all ports on a module, or a superviso r e ng ine, u se the show
counters command.
show counters {mod | mod/port}
show counters supervisor
Syntax Description
Defaults This command has no default setting.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines T he “Last-T ime- Cleared” ti mestamp at the end of th e show counters {mod | mod/port} command output
is either the last time the counters were cleared on the specified port or the last time that the module w as
inserted or the switch was reset, which ever hap pene d la st.
Examples This example shows how to display the counters for module 2, port 1:
Note The counters displayed may change depending on the module type queried.
Console> show counters 2/1
Generic counters version 1
64 bit counters
0 rxHCTotalPkts = 2170558
1 txHCTotalPkts = 2588911
2 rxHCUnicastPkts = 2142669
3 txHCUnicastPkts = 2585457
4 rxHCMulticastPkts = 19552
5 txHCMulticastPkts = 1789
6 rxHCBroadcastPkts = 8332
7 txHCBroadcastPkts = 1665
8 rxHCOctets = 190513843
9 txHCOctets = 227423299
10 rxTxHCPkts64Octets = 20996
11 rxTxHCPkts65to127Octets = 4737279
12 rxTxHCPkts128to255Octets = 1170
13 rxTxHCPkts256to511Octets = 16
14 rxTxHCpkts512to1023Octets = 8
mod Number of the module.
mod/port Number of the module and the port.
supervisor Displays counters for the supervisor engine.