2-731
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show flash
show flash To list bootflash or Flash PC card information, including file code names, version numbers, volume ID,
status, and sizes, use the show flash command.
show flash devices
show flash [[m/]device:] [all | chips | filesys]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines A colon (:) is required after the specified device.
Examples This example shows how to list the Flash files:
Console> show flash devices
slot0, bootflash, tftp
Console>
These examples show how to list supervisor engine Flash information:
Console> show flash
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. ffffffff fec05d7a 4b3a4c 25 4667849 Mar 03 2000 08:52:09 cat6000-sup.
5-3-4-CSX.bin
2 .. ffffffff 4e5efc31 c0fadc 30 7716879 May 19 2000 06:50:55 cat6000-sup-
d.6-1-0-83-ORL.bin
3605796 bytes available (12384988 bytes used)
Console>
m/ (Optional) Module number of the supervisor engine containing the Flash device.
device:(Optional) Valid devices are bootflash and slot0.
all (Optional) Lists deleted files, undeleted files, and files with errors on a Flash
memory device.
chips (Optional) Shows information about the Flash chip.
filesys (Optional) Shows the Device Info Block, the Status Info, the Usage Info, and the
volume ID.