2-94
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear security acl capture-ports
clear security acl capture-ports
To remove a port from the capture port list, use the clear security acl capture-ports command.
clear security acl capture-ports {mod/ports...}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines Configurations you make by entering this command are saved in NVRAM. This command does not
require that you enter the commit command.
If you have several ports and a few are removed, the remaining ports continue to capture th e tra ffic.
Examples This example shows how to remove entries from the capture port list:
Console> (enable) clear security acl capture-ports 1/1,2/1
Successfully cleared the following ports:
1/1,2/1
Console> (enable)
Related Commands set security acl capture-ports
show security acl capture-ports
mod/ports... Number of the module and the ports on the module.