2-500
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set rcp username
set rcp username
To specify your username for rcp file transfers, use the s et rcp usern ame command.
set rcp username username
Syntax Description
Defaults There are no default settings for this command.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The username can be a maximum of 40 characters, must be different from “root,” and not a null string.
The only case where you cannot configure the rcp username is for the VMPS database where you will
use an rcp VMPS username. Use the set vmps downloadmethod command to specify the rcp VMPS
username.
Examples This example shows how to set the username for rcp:
Console> (enable) set rcp username jdoe
Console> (enable)
Related Commands clear rcp
set vmps downloadmethod
show rcp
username Username up to 14 characters long.