2-495
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set radius deadtime
set radius deadtime
To set the time to skip RADIUS servers that do not reply to an authentication request, use the set radius
deadtime command.
set radius deadtime minutes
Syntax Description
Defaults The default is 0 minutes.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines I f only one RADI US serv er is co nf igured or if all the conf ig ured ser ver s are mark ed de ad, dea dtime will
be ignored since no alternate servers are available. By default, the deadtime is 0 minutes; the RADIUS
servers are not marked dead if they do not respond.
Examples This example shows how to set the RADIUS deadtime to 10 minutes:
Console> (enable) set radius deadtime 10
Radius deadtime set to 10 minutes.
Console> (enable)
Related Commands show radius
minutes Length of time a RADIUS server does not respond to an authentication request;
valid values are from 0 to 1440 minutes.