2-1057
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show system
show system
To display system information, use the show system command.
show system
Syntax Description This command has no keywords or arguments.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines The switching bus traffic values displayed apply to a single bus.
Examples This example shows how to display system information:
Console> show system
PS1-Status PS2-Status
---------- ----------
none ok
Fan-Status Temp-Alarm Sys-Status Uptime d,h:m:s Logout
---------- ---------- ---------- -------------- ---------
ok off ok 1,22:38:21 20 min
PS1-Type PS2-Type
-------------------- --------------------
none WS-CAC-1300W
Modem Baud Traffic Peak Peak-Time
------- ----- ------- ---- -------------------------
disable 9600 0% 0% Mon Jan 10 2000, 15:23:31
PS1 Capacity: 1153.32 Watts (27.46 Amps @42V)
System Name System Location System Contact CC
------------------------ ------------------------ ------------------------ ---
Information Systems Closet 230 4/F Xena ext. 24
No active fabric module in the system.