2-758
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show ip permit
show ip permit
To display the IP permit list information, use the show ip permit command.
show ip permit [noalias]
Syntax Description
Defaults This command has no default value.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to display the IP permit list information:
Console> (enable) show ip permit
Telnet permit list feature enabled.
Ssh permit list enabled.
Snmp permit list feature disabled.
Permit List Mask Access-Type
---------------- --------------- ---------------
172.16.0.0 255.255.0.0 telnet
172.20.52.3 snmp telnet
172.20.52.32 255.255.255.224 snmp
Denied IP Address Last Accessed Time Type
----------------- ------------------ ------
172.100.101.104 01/20/97,07:45:20 SNMP
172.187.206.222 01/21/97,14:23:05 Telnet
Console> (enable)
Table 2 -35 describes the fields in the show ip permit command output.
noalias (Optional) Forces the display to show IP addresses, not IP aliases.
Table2-35 show ip permit Command Output Fields
Field Description
IP permit list feature
enabled Status of whether the IP permit list feature is enabled or disabled.
Permit List IP addresses and IP aliases that are allowed to access the switch.
Mask Subnet masks of permitted IP addresses.
Denied IP Address IP addresses and IP aliases that are not allowed to access the
switch.