2-946
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show qos info
This example shows another display of the current QoS runtime information:
Console> show qos info runtime 8/1
Run time setting of QoS:
QoS is enabled
Policy Source of port 8/1:Local
Tx port type of port 8/1 :1p2q2t
Rx port type of port 8/1 :1q2t
Interface type:port-based
ACL attached:
The qos trust type is set to trust-cos.
Default CoS = 0
Queue and Threshold Mapping for 1p2q2t (tx):
Queue Threshold CoS
----- --------- ---------------
1 1 0 1
1 2 2 3
2 1 4 6
2 2 7
3 - 5
Queue and Threshold Mapping for 1q2t (rx):
Queue Threshold CoS
----- --------- ---------------
1 1 0 1 2 3 4
1 2 5 6 7
Rx drop thresholds:
Queue # Thresholds - percentage (* abs values)
------- -------------------------------------
1 80% (13106 bytes) 100% (16384 bytes)
Tx drop thresholds:
Tx drop-thresholds feature is not supported for this port type.
Rx WRED thresholds:
WRED feature is not supported for this port type.
Tx WRED thresholds:
Queue # Thresholds - percentage (* abs values)
------- ------------------------------------------
1 40%:70% (170393:298240 bytes) 70%:100% (298188:425856 bytes)
2 40%:70% (32768:57344 bytes) 70%:100% (57344:77824 bytes)
Tx queue size ratio:
Queue # Sizes - percentage (* abs values)
------- -------------------------------------
1 70% (425984 bytes)
2 15% (81920 bytes)
3 15% (81920 bytes)
Rx queue size ratio:
Rx queue size-ratio feature is not supported for this port type.
WRR Configuration of ports with speed 10Mbps:
Queue # Ratios (* abs values)
------- -------------------------------------
1 100 (25600 bytes)
2 255 (65280 bytes)
(*) Runtime information may differ from user configured setting due to hardware
granularity.
Console> (enable)