2-63
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear module password
clear module password
To clear the password set by the password[username] NAM command, use the clear module password
command.
clear module password mod
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is supported by the NAM only.
The password[username ] command is a NAM command and not a supervisor engine console command.
A message is displayed when the password is successfully cleared. See the “Examples” section for an
example of the message.
Examples This example shows how to clear the password from the NAM:
Console> (enable) clear module password 6
Module 6 password cleared.
Console> (enable) 2000 Apr 07 11:03:06 %SYS-5-MOD_PASSWDCLR:Module 6 password cl
eared from telnet/10.6.1.10/tester
Console> (enable)
Related Commands password (re fer to the NAM Installation and Configuration Note)
mod Number of the NAM.