2-72
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear port host
clear port host
To clear the port configuration for optimizing a host connection, use the clear port host command.
clear port host mod/port
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is not supported by the NAM.
The clear port host command sets channel mode to auto, disables spanning tree PortFast, and sets the
trunk mode to auto.
Examples This example shows how to remove specific roles from a port:
Console> (enable) clear port host 5/5
Port(s) 5/5 trunk mode set to auto.
Spantree port 5/5 fast start disabled.
Port(s) 5/5 channel mode set to auto.
Console> (enable)
Related Commands set port host
mod/port Number of the module and the port on the module.