2-1080
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show traffic
show traffic
To display traffic and peak information, use the show traffic command.
show traffic
Syntax Description This command has no keywords or arguments.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows the traffic and peak information display on a system configured with the Supervisor
Engine 1 with Layer 3 Switching Engine (WS-F6K-PFC):
Console> (enable) show traffic
Threshold: 100%
Traffic Peak Peak-Time
------- ---- -------------------------
0% 0% Tue Apr 25 2000, 12:07:32
Console> (enable)
This example shows the traffic and peak information display on a system c onfi gured with the Sup ervisor
Engine 2 with Layer 3 Switching Engine II (PFC II):
Console> (enable) show traffic
Threshold:100%
Backplane-Traffic Peak Peak-Time
----------------- ---- -------------------------
0% 0% Thu Jul 27 2000, 14:03:27
Fab Chan Input Output
-------- ----- ------
0 0% 0%
1 0% 0%
2 0% 0%
3 0% 0%
4 0% 0%
.
.
.
14 0% 0%
15 0% 0%
16 0% 0%
17 0% 0%
Related Commands show system