2-212
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set authentication login
Usage Guidelines This command allows you to choose the authentication method for the web interface. If you configure
the authentication method for the HTTP session as RADIUS, then the username or passwo rd is v alidated
using the RADIUS protocol, and TACACS+ and Kerberos authentication is set to disable for the HTTP
sessions. By default, the HTTP login is validated using the local login password.
You can specify the authentication method for console, telnet, http, or all by entering the console,
telnet, http, or all keywords. If you do not specify console, telnet, http, or all, the authentication
method default is for all sessions.
Examples This example shows how to disable TACACS+ authentication access for Telnet sessions:
Console> (enable) set authentication login tacacs disable telnet
tacacs login authentication set to disable for the telnet sessions.
Console> (enable)
This example shows how to disable RADIUS authentication access for console se ssion s:
Console> (enable) set authentication login radius disable console
radius login authentication set to disable for the console sessions.
Console> (enable)
This example shows how to disable Kerberos authentication access for Telnet sessions:
Console> (enable) set authentication login kerberos disable telnet
kerberos login authentication set to disable for the telnet sessions.
Console> (enable)
This example shows how to set TACACS+ authentication access as the primary method for HTTP
sessions:
Console> (enable) set authentication login tacacs enable http primary
tacacs login authentication set to enable for HTTP sessions as primary authentification
method.
Console> (enable)
This example shows how to limit login attempts:
Console> (enable) set authentication login attempt 5
Login authentication attempts for console and telnet logins set to 5.
Console> (enable)
This example shows how to set the lockout time for both console and Telnet connectio ns:
Console> (enable) set authentication login lockout 50
Login lockout time for console and telnet logins set to 50.
Console> (enable)
Related Commands set authentication enable
show authentication