2-850
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port
3/8 onhook 1 full 64k FXS
3/9 onhook 1 full 64k FXS
3/10 onhook 1 full 64k FXS
3/11 onhook 1 full 64k FXS
3/12 onhook 1 full 64k FXS
3/13 onhook 1 full 64k FXS
3/14 onhook 1 full 64k FXS
3/15 onhook 1 full 64k FXS
3/16 onhook 1 full 64k FXS
3/17 onhook 1 full 64k FXS
3/18 onhook 1 full 64k FXS
3/19 onhook 1 full 64k FXS
3/20 onhook 1 full 64k FXS
3/21 onhook 1 full 64k FXS
3/22 onhook 1 full 64k FXS
3/23 onhook 1 full 64k FXS
3/24 onhook 1 full 64k FXS
Port DHCP MAC-Address IP-Address Subnet-Mask
-------- ------- ----------------- --------------- ---------------
3/1-24 enable 00-10-7b-00-13-e4 172.20.34.50 255.255.255.0
Port Call-Manager DHCP-Server TFTP-Sever Gateway
-------- ----------------- --------------- --------------- ---------------
3/1-24 172.20.34.207 172.20.34.207 172.20.34.207 -
Port DNS-Server Domain
-------- --------------- --------------------------
3/1-24 172.20.34.207 -
Port EchoCancel(ms) CallManagerState DSP-Type
-------- -------------- ---------------- --------
3/1-24 4660 registered C549
Port ToneLocal Impedance InputGain(dB) OutputAtten(dB)
-------- ------------- --------- ------------- ---------------
3/1-24 northamerica 0 0 0
Port RingFreq Timing Timing Timing Timing
(Hz) Digit(ms) InterDigit(ms) Pulse(ms) PulseDigit(ms)
-------- -------- --------- -------------- --------- --------------
3/1-24 20 100 100 0 0
Console> (enable)
Table 2 -60 describes the possible fields (de pending on the port type queried) in the show port command output.
Table2-60 show port Command Output Fields
Field DescriptionPort Module and port number. Name Name (if configured) of the port. Status Status of the port (connected, notconnect, connecting, standby, faulty, inactive, shutdown, disabled, monitor, active, dot1p, untagged, inactive, or onhook).