Cisco Systems 78-15328-01 set logging telnet

2-333
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set logging telnet
set logging telnet
To enable or disable logging on Telnet sessions, use the set logging telnet command.
set logging telnet {enable | disable}
Syntax Description
Defaults The default is system message logging to the Telnet session is enabled.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to allow system logging messages to be sent to new Telnet sessions:
Console> (enable) set logging telnet enable
System logging messages will be sent to the new telnet sessions.
Console> (enable)
This example shows how to prevent system logging messages from being sent to new Telnet sessions:
Console> (enable) set logging telnet disable
System logging messages will not be sent to the new telnet sessions.
Console> (enable)
Related Commands se t lo gging co nsole
set logging level
show logging
show logging buffer
enable Enables logging on Telnet sessions.
disable Disables logging on Telnet sessions.