2-750
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show imagemib
show imagemib
To display image information provided in the CISCO-IMA GE-MIB fo r a pa rticular image, u se the show
imagemib command.
show imagemib filename
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to display CISCO-IMAGE-MIB information for the Flash ima ge:
Console> (enable) show imagemib bootflash:cat6000-sup.6-1-1.bin
show mib info for file bootflash:cn50
CW_BEGIN$cat6000-WS-X6K-SUP1$
CW_IMAGE$bootflash:at6000-sup.5-5-1.bin$
CW_FAMILY$Catalyst 6000 Switch$
CW_MODULE$Catalyst Supervisor Module$
CW_VERSION$5.5.1$
CW_MIN_DRAM$ 32 MB$
CW_MIN_BOOTFLASH$ 8 MB$
CW_MIN_NVRAM$ 512 KB$
CW_BUILDTIME$ Mar 24 2000 00:32:33$
CW_SYSDESCR$Catalyst Operating System$
CW_END$cat6000-WS-X6K-SUP1$
Console>
filename Name of the Flash device on the supervisor engine.