2-339
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set mls bridged-flow-statistics
set mls bridged-flow-statisticsTo enable or disable statistics for bridged flows for specified VLANs, use the set mls
bridged-flow-statistics command.
set mls bridged-flow-statistics {enable | disable} {vlanlist}
Syntax Description
Defaults By default, bridged-flow statistics is disabled on all VLANs.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines You can enter one or multiple VLANs. The following examples are valid VLAN lists: 1; 1,2,3; 1-3,7.
Bridged flows are exported through NDE when bridged flow statistics is enab led.
Examples This example shows how to enable bridged-flow statistics on the specified VLANs:
Console> (enable) set mls bridged-flow-statistics enable 1-21
Netflow statistics is enabled for bridged packets on vlan(s) 1-21.
Console> (enable)
Related Commands show mls nde
show mls entry
show mls statistics
enable Enables statistics for bridged flows.
disable Disables statistics for bridged flows
vlanlist Number of the VLAN or VLANs; valid values are 1 to 1000, 1025 to 4094.
See the “Usage Guidelines” section for more information.