2-188
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
reset—switch
reset—switch
To restart the system or an individual module, schedule a system reset, or cancel a scheduled reset, use
the reset command.
reset [mod | system | mindown]
reset [mindown] at {hh:mm} [mm/dd] [reason]
reset [mindown] in [hh:] {mm} [reason ]
reset [cancel]
reset {mod} [bootdevice[,bootdevice]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If you do not specify a module number (either a switching module or the active supervisor engine
module), the command resets the entire system.
You can use the reset mod command to switch to the redundant supervisor engine, where mod is the
module number of the active supervisor engine.
mod (Optional) Number of the module to be restarted.
system (Optional) Resets the system.
mindown (Optional) Performs a reset as part of a minimal downtime software
upgrade in a system with a redundant supervisor engine.
at Schedules a system reset at a specific future time.
hh:mm Hour and minute of the scheduled reset.
mm/dd (Optional) Month and day of the scheduled reset.
reason (Optional) Reason for the reset.
in Schedules a system reset in a specific time.
hh (Optional) Number of hours into the future to reset the switch.
mm Number of minutes into the future to reset the switch.
cancel (Optional) Cancels the scheduled reset.
mod Number of the Network Analysis Module (NAM) or Intrusion
Detection System Module (IDSM).
bootdevice (Optional) Boot device identification; for format guidelines, see the
“Usage Guidelines” section.