2-441
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set protocolfilter
set protocolfilter
To activate or deactivate protocol filtering on Ethernet VLANs and on nontrunking Ethernet, Fast
Ethernet, and Gigabit Ethernet ports, use the set protocolfilter command.
set protocolfilter {enable | disable}
Syntax Description
Defaults The default is protocol filtering is disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is not supported by the NAM.
Protocol filtering is supported only on Ethernet VLANs and on no ntru nki ng E the rCha nnel port s.
Examples This example shows how to activate protocol filtering:
Console> (enable) set protocolfilter enable
Protocol filtering enabled on this switch.
Console> (enable)
This example shows how to deactivate protocol filtering:
Console> (enable) set protocolfilter disable
Protocol filtering disabled on this switch.
Console> (enable)
Related Commands show protocolfilter
enable Activates protocol filtering.
disable Deactivates protocol filtering.