2-262
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set feature dot1x-radius-keepalive
set feature dot1x-radius-keepalive
To enable or disable the 802.1X RADIUS keepalive state, use the set feature dot1x-radius-keepalive
command.
set feature dot1x-radius-keepalive {enable | disable}
Syntax Description
Defaults RADIUS keepalive state is enabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines To check whether or not configured RADIUS servers are alive, the switch can send out a dummy
username for authentication. In reply to the dummy username, the RADIUS servers send an access
rejection.
To turn off attempts to authenticate that test the RADIUS servers, enter the set feature
dot1x-radius-keepalive disable command. If you disable this feature, the switch does not c hec k the
status of the servers, and the RADIUS server logs do not fill with dummy attempts.
Examples This example shows how to disable the 802.1X RADIUS keepalive state fea tur e:
Console> (enable) set feature dot1x-radius-keepalive enable
dot1x radius-keepalive state enabled.
Console> (enable)
Related Commands show dot1x
enable Enables 802.1X RADIUS keepalive state.
disable Disables 802.1X RADIUS keepalive state.