2-1072
Catalyst 6500 Series Switch Command Reference—Release7.6
78-15328-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show test
Table 2 -93 describes the possible fields in the show test com ma nd out put. T he fields shown depend on
the module type queried.
Table2-93 show test Command Output Fields
Field Description
Environmental Status Test results that apply to the general system environment.
PS (3.3V) Test results for the 3.3 V power supply.
PS (12V) Test results for the 12 V power supply.
PS (24V) Test results for the 24 V power supply.
PS1 Test results for power supply 1.
PS2 Test results for power supply 2.
Temperature Test results for the temperature.
Fan Test results for the fan.
Module # Test results that apply to the module #. The module type is
indicated as well.
Network Management
Processor (NMP) Status Test results that apply to the NMP on the sup ervisor engine module.
ROM Test results for the ROM.
Flash-EEPROM Test results for the Flash EEPROM.
Ser-EEPROM Test results for the serial EEPROM.
NVRAM Test results for the NVRAM.
EARL Status Fields that display the EARL status information.
NewLearnTest Test results for the NewLearn test (EARL).
IndexLearnTest Test results for the IndexL ea rn test (E ARL) .
DontForwardTest Test results for the DontForward test (EARL).
MonitorTest Test results for the Monitor test (EARL).
DontLearn Test results for the DontLearn test (EARL).
FlushPacket Test results for the FlushPacket test (EARL).
ConditionalLearn Test results for the ConditionalLearn test (EARL).
EarlLearnDiscard Test results for the EarlLearnDiscard test (EARL).
EarlTrapTest Test results for the EarlTrap test (EARL).
LCP Diag Status for
Module 1 Test results for the specified module.
CPU Test results for the CPU.
Sprom Test results for the serial PROM.
Bootcsum Test results for the Boot ROM checksum.
Archsum Test results for the archive Flash checksum.
RAM Test results for the RAM.
LTL Test results for the local-target logic.
CBL Test results for the color-blocking logic.